Know your refrigerator filter element-6

The refrigerator water filter can operate seamlessly in the refrigerator to provide clear and clean water for family members on demand. It can also remove impurities, make ice crystal clear, can be used for cold drinks.

Filtered water tastes better and is used to make drinks. This refrigerator filter is a cheap way to promote the health of an entire family through clean water.

Filtration process

The filter adopts the form of scientific design to achieve the best filtering equipment. The outside of the water filter is plastic, and the inside is filled with activated carbon. This type of carbon is designed to be highly porous to capture the smallest particles in the domestic water supply system, which contaminate the refrigerator's drinking water by adsorption (the process by which these particles adhere to the inside of the activated carbon).

Your domestic water goes into the refrigerator from the back and into the filter. When it leaves the filter, it flows through one line to the ice maker and through another to the water dispenser on the refrigerator to provide clean, delicious water and ice. Activated carbon attracts all impurities, including cysts, lead, asbestos, mold, bacteria and chlorine. All of these items are left in the filter, and the end result is cool water and ice that is good for everyone.

Installation instructions for water filter

The water filter is very easy to install and takes only about a minute to install.

It's in the fridge

  1. Open the refrigerator and put the water filter on the top of the refrigerator.
  2. Push the locking tab inward to release the latch.
  3. Hold the filter and turn it about a quarter turn counter clockwise until it is released.
  4. Pull the old filter straight out.
  5. Push the new filter into the chamber; turn it clockwise about a quarter turn until it clicks into place.

In the kickboard

  1. Find the refrigerator filter in the kickboard at the bottom of the left side of the refrigerator.
  2. Find the concave tab and pull it forward to unlock the filter.
  3. Rotate the filter one quarter turn counter clockwise to release it.
  4. Pull the old filter straight out.
  5. Press the new filter indoors; turn it clockwise by a quarter turn to install it.

No matter where the water filter is located, it is necessary to flush the system with about two gallons of water flowing through the water dispenser.

Replace the water filter regularly

The water filter will provide your family with fresh water and ice seamlessly for about six months. After this period of time, the activated carbon inside the filter can not effectively remove particles and needs to be replaced. You can record dates on the calendar to remind you to change the filter every six months.